50bps to 921Kbps
5, 6, 7, 8
RTS/CTS and DTR/DSR (RS232 only)
XON/XOFF
RTU Master/RTU Slave/ASCII Master/ASCII Slave
Master mode: Supports up to 32 TCP slave connection requests
Slave mode: Supports up to 32 TCP master connection requests
Odd, Even, None, Space, Mark
1 x DB9 male for RS-232
RS-232/ 4-wire RS-422 or RS-485/ 2-wire RS-485
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
4-wire RS-485: Tx+, Tx-, Rx+, Rx-, GND
2-wire RS-485: Data A (+), Data B (-), GND
1, 1.5, 2
100m
6KV
1 x RJ45
10/100BASE-TX
2KV
Provides one relay output for power failure
Alarm relay current carry ability: 1A@DC 24V
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
32 x 87.8 x 135 mm
IP30 metal
DIN-rail kit and wall-mount ear
System: Power 1, Power 2, Alarm, SYS
TP Port: Link/Active
Serial Port: Tx and Rx
Full Loading
9V DC: 0.35A (3.15 watts)
12V DC: 0.28A (3.36 watts)
24V DC: 0.12A (3 watts)
48V DC: 0.08A (3.84 watts)
9~48V DC/ 24V AC, redundant power with reverse polarity protection
< 5 sec: System reboot
> 5 sec: Factory default
392g
5 to 95%, non-condensing
RoHS
FCC Part 15 Class A, CE Certification Class A
IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 854 Telnet
RFC 958 NTP
RFC 1591 DNS (client only)
RFC 1908 SNMPv2c
RFC 2068 HTTP
RFC 2131 DHCP Client
RFC 2732 Format for Literal IPv6 Addresses in URL's
RFC 3315 DHCPv6 Client
RFC 3513 IPv6 Addressing Architecture
RFC 3596 DNSv6
RFC 4443 ICMPv6
EIA/TIA RS232/422/485
-40~85˚C
Record: System log / SNMP trap
IPv4 and IPv6
Web management
Telnet Console management
Windows-based VCOM Utility management
RTU Master
RTU Slave
ASCII Master
ASCII Slave
Allow maximum 4 accessible IP address hosts/ranges
RFC1213 MIB-II
RFC1317 RS232-like MIB
NTP
